Product features excellent corrosion resistance, the film resistivity stability excellent resistance to penetration of oil pollution excellent heat resistance (≤200 ℃) film tough wear, good workability product uses for the petrochemical trade crude oil and refined oil tank wall corrosion, can also be used for other electronics industry needs anti-static places color gray construction conditions recommended by airless spray nozzle size 0.4 ~ 0.5mm pressure 100 ~ 150kg / cm 2 dilution ratio of 0 ~ 5% by wet . (weight ratio) is suitable for conventional spray, brush and roller diluent FXH-4 epoxy diluent mixing ratio of two-component: the main agent / curing agent = 10/1 (weight ratio) mixed Temperature: 10 ℃ 20 ℃ 30 ℃ mix of: 10hrs 8hrs 6hrs coating thickness of the dry film: 50μm / Road solids content of 79.5% share of the theoretical value of 1.47 applied rate: 0.16 kg / m / 50μm 0.109L / square meter / 50μm The actual value: surface treatment with a variety of factors, external environment, construction methods and so on. Drying Time Temperature Tack hard work: 10 ℃ 20 ℃ 30 ℃ 1.5hrs 1.2hrs 1hrs 14hrs 10hrs 8hrs Coating interval Min Max Min largest 14hrs 10hrs 8hrs - - - storage period a year Packing component packaging:.. 33kg for a group, a component of 30kg, two components of the surface treatment of 3kg rushed with water-soluble salts and other contaminants. Remove grease in accordance with SSPC-SP1 solvent cleaning standards. By blasting to remove rust, scale and damaged shop primer ISO Sa2.5 (SSPC-SP10). With high-pressure air purge to remove dust and dirt. Sure that the surface is clean and dry before construction. Painting Supporting Substrates: painted on bare steel apply: Non-static conductive carbon-based anti-corrosion epoxy intermediate paint, paint the construction of any non-carbon-based antistatic anticorrosive epoxy paint or refer to my company supporting safety precautions should be guaranteed provides the following measures: Avoid contact with skin and eyes. If the paint comes into contact with skin or eyes, rinse with plenty of water and seek medical attention immediately. Ensure good ventilation. Risk of fire or explosion. Site comply with all health and safety regulations. To draw attention to the information provided in this manual are currently held by our most comprehensive and correct information, in view of product use conditions beyond our control, there is a world of information does not contain guarantees that the buyer is responsible only for the selection of products. Due to the continuous development of our products and production processes, all of which are in our confirmation message.