Features good resistance to oil, oil, aliphatic hydrocarbon solvent properties and salt water, while a variety of chemicals with good tolerability excellent workability thick coating excellent resistance to abrasion and impact resistance Usage main for tankers and solvent tanks, sea cabin painting, can be used for resistance to chemicals, salt water, solvent tank walls required corrosion. Color Gray Construction conditions airless spray nozzle size recommended pressure 0.5 ~ 0.6mm 100 ~ 150kg / cm 2 dilution ratio 0 ~ 5% by wet. (Weight ratio) applied to conventional spray, brush and roller thinner FXH-4 The mixing ratio of the two-component epoxy diluent: the main agent / curing agent = 5/1 (weight ratio) mixed Temperature: 10 ℃ 20 ℃ 30 ℃ Pot life: 5hrs 4hrs 3hrs coating thickness of the dry film: 50μm / Road wet film 119μm / Road solids content of 68% share of the theoretical value of 1.42 applied rate: 0.12 kg / m / 50μm 0.085L / square meter / 50μm actual value: a variety of factors and surface treatment, the external environment, construction methods, etc. related. Drying Time Temperature Tack hard work: 10 ℃ 20 ℃ 30 ℃ 3hrs 2hrs 1hrs 18hrs 16hrs 12hrs Coating interval Min Max Min largest 18hrs 16hrs 12hrs - - - storage period a year Packing component packaging:.. 24kg for a group , a component of 20kg, two component surface treatment for 4kg washed with water to salt and other water-soluble contaminants. Remove grease in accordance with SSPC-SP1 solvent cleaning standards. By blasting to remove rust, scale and damaged shop primer ISO Sa2.5 (SSPC-SP10). With high-pressure air purge to remove dust and dirt. Sure that the surface is clean and dry before construction. Painting Supporting Substrates: Bare steel coated Applicable: epoxy phenolic paint or refer to my company's matching paint any safety precautions should be guaranteed the construction of the following measures: Avoid contact with skin and eyes. If the paint comes into contact with skin or eyes, rinse with plenty of water and seek medical attention immediately. Ensure good ventilation. Risk of fire or explosion. Site comply with all health and safety regulations. To draw attention to the information provided in this manual are currently held by our most comprehensive and correct information, in view of product use conditions beyond our control, there is a world of information does not contain guarantees that the buyer is responsible only for the selection of products. Due to the continuous development of our products and production processes, all of which are in our confirmation message.