Product features excellent resistance to acid, alkali, oil and seawater resistant properties to prevent moisture or chemical fumes invade strong mechanical resistance and adhesion for conventional airless spray system products mainly for use underwater part of the hull and ballast tanks Crude oil tanks and other parts of corrosion, can be used for waste oil, sewage environments steel equipment, bridges, offshore platforms and long-term heavy-duty concrete structures. Color Gray Construction conditions airless spray nozzle size recommended pressure 0.5 ~ 0.6mm 100 ~ 150kg / cm 2 dilution ratio 0 ~ 5% by wet. (Weight ratio) applied to conventional spray, brush and roller thinner FXH-4 The mixing ratio of the two-component epoxy diluent: the main agent / curing agent = 5/1 (weight ratio) mixed Temperature: 10 ℃ 20 ℃ 30 ℃ Pot life: 4hrs 3hrs 2hrs coating thickness of the dry film: 100μm / Road solids content of 75% share of the theoretical value of 1.45 applied rate: 0.223 kg / sq m / 100μm 0.154L / square meter / 100μm actual value: surface treatment with a variety of factors, external environment, construction methods and so on. Drying Time Temperature Tack hard work: 10 ℃ 20 ℃ 30 ℃ 2hrs 1.5hrs 1hrs 14hrs 10hrs 8hrs Coating interval Min Max Min largest 14hrs 10hrs 8hrs - - - storage period a year Packing component packaging:.. 24kg for a group, a component of 20kg, two component surface treatment for 4kg washed with water to salt and other water-soluble contaminants. Remove grease in accordance with SSPC-SP1 solvent cleaning standards. By blasting to remove rust, scale and damaged shop primer ISO Sa2.5 (SSPC-SP10). With high-pressure air purge to remove dust and dirt. Sure that the surface is clean and dry before construction. Painting Supporting Substrates: painted on bare steel apply: You can paint with any construction epoxy, polyurethane, a variety of anti-fouling paint matching or refer to my company supporting safety precautions should ensure the provision of the following measures: Avoid contact with skin and eyes. If the paint comes into contact with skin or eyes, rinse with plenty of water and seek medical attention immediately. Ensure good ventilation. Risk of fire or explosion. Site comply with all health and safety regulations. To draw attention to the information provided in this manual are currently held by our most comprehensive and correct information, in view of product use conditions beyond our control, there is a world of information does not contain guarantees that the buyer is responsible only for the selection of products. Due to the continuous development of our products and production processes, all of which are in our confirmation message.