Product Features warm dry rapidly. Can be cured more than -5 ℃ thick coating of heavy-duty coatings excellent resistance to sea water penetration resistance and corrosion resistance when the air humidity of 94%, the film can be a normal film formation rugged, abrasion resistance, heavy oil, crude oil, fat hydrocarbon solvents and many chemicals product uses mainly for the use of fire retardant paint and primer supporting steel surface, pipeline corrosion primer. Color gray, red iron construction conditions recommended by airless spray nozzle size 0.4 ~ 0.5mm pressure 100 ~ 150kg / cm 2 dilution ratio 0 ~ 10% by wet. (Weight ratio) applied to conventional spray, brush and roller Thinner FXH-4 epoxy diluent mixing ratio of two-component: the main agent / curing agent = 4/1 (weight ratio) mixed Temperature: 0 ℃ 15 ℃ 30 ℃ Pot life: 14hrs 10hrs 8hrs dry film thickness of the coating : 50μm / Road solids content of 72% share of the theoretical value of 1.33 applied rate: 0.13 kg / m / 50μm 0.098L / square meter / 50μm actual value: surface treatment with a variety of factors, external environment, construction methods and so on. Drying Time Temperature Tack hard work: 10 ℃ 20 ℃ 30 ℃ 2hrs 1.5hrs 1hrs 14hrs 10hrs 8hrs Coating interval Min Max Min largest 14hrs 10hrs 8hrs - - - storage period a year Packing component packaging:.. 22.5kg for a group, a component of 20kg, 2.5kg components for surface treatment of two rushed with water-soluble salts and other contaminants. Remove grease in accordance with SSPC-SP1 solvent cleaning standards. By blasting to remove rust, scale and damaged shop primer ISO Sa2.5 (SSPC-SP10). With high-pressure air purge to remove dust and dirt. Sure that the surface is clean and dry before construction. Painting Supporting Substrates: painted on bare steel applies: with most of the intermediate paint, any paint construction topcoats or refer to my company supporting safety precautions should ensure the provision of the following measures: Avoid contact with skin and eyes. If the paint comes into contact with skin or eyes, rinse with plenty of water and seek medical attention immediately. Ensure good ventilation. Risk of fire or explosion. Site comply with all health and safety regulations. To draw attention to the information provided in this manual are currently held by our most comprehensive and correct information, in view of product use conditions beyond our control, there is a world of information does not contain guarantees that the buyer is responsible only for the selection of products. Due to the continuous development of our products and production processes, all of which are in our confirmation message.